ANDEMBRY

Before use, ANDEMBRY should be visually inspected for appearance by gentle inversion.‍​‍‍‍​‍‍‍‍‍‍‍‍​‍ The solution should be slightly opalescent to clear, brownish-yellow to yellow. Solutions that are discolured or contain particles should not be used. Do not shake. Administration steps After removing the pre-filled pen from the refrigerator, wait 30 minutes before injecting to allow the solution to reach room temperature. Inject ANDEMBRY subcutaneously into the abdomen, thigh or upper arm (see section 4.2). Injection with the pre-filled pen may take up to 15 seconds. Listen for the first 'click' (this signals the start of injection, and the yellow plunger will start to move across the window). Keep pressing and watch the yellow plunger move down to fill the window. A second 'click' will be heard and the viewing window will be completely yellow. Wait an extra 5 seconds to make sure the full dose was received. Each pre-filled pen is for single use only. Discard the pre-filled pen after injection is completed in a sharps container or closed puncture resistant container. Any unused medicinal product or waste material should be disposed of in accordance with local requirements. The instructions for use are provided within the Patient Information Leaflet.