This information is for educational purposes only. It is not intended as medical advice. Always consult a qualified healthcare professional.
Alprolix — Description, Dosage, Side Effects | PillsCard
Rx
Alprolix
1000 IU, Proszek i rozpuszczalnik do sporządzania roztworu do wstrzykiwań
INN: Eftrenonacogum alpha
Data updated: 2026-04-24
Available in:
🇨🇿🇬🇧🇵🇱🇸🇰
Form
Proszek i rozpuszczalnik do sporządzania roztworu do wstrzykiwań
Dosage
1000 IU
Route
dożylna
Storage
—
About This Product
User Reviews
Reviews reflect personal experiences and are not medical advice. Always consult your doctor.
Manufacturer
Swedish Orphan Biovitrum AB (Szwecja)
Composition
Eftrenonacogum alpha 1000 IU
ATC Code
B02BD04
Source
URPL
Pharmacotherapeutic group: antihaemorrhagics, blood coagulation factor IX, ATC code: B02BD04
Mechanism of action
Factor IX is a single chain glycoprotein with a molecular mass of about 55,000 Dalton. It is a vitamin-K dependent coagulation factor. Factor IX is activated by factor XIa in the intrinsic coagulation pathway and by the factor VII/tissue factor complex in the extrinsic pathway. Activated factor IX, in combination with activated factor VIII, activates factor X. Activated factor X converts prothrombin into thrombin. Thrombin then converts fibrinogen into fibrin and a clot is formed.
Haemophilia B is a sex-linked hereditary disorder of blood coagulation due to decreased levels of factor IX and results in bleeding into joints, muscles or internal organs, either spontaneously or as a result of accidental or surgical trauma. By replacement therapy the plasma level of factor IX is increased thereby enabling a temporary correction of the factor deficiency and correction of the bleeding tendencies.
ALPROLIX (eftrenonacog alfa) is a long-acting, fully recombinant, fusion protein comprising human coagulation factor IX covalently linked to the Fc domain of human immunoglobulin G1, and produced by recombinant DNA technology.
The Fc region of human immunoglobulin G1 binds with the neonatal Fc receptor. This receptor is expressed throughout life as part of a naturally occurring pathway that protects immunoglobulins from lysosomal degradation by cycling these proteins back into circulation, resulting in their long plasma half-life.
Clinical efficacy and safety
The safety, efficacy, and pharmacokinetics of ALPROLIX were evaluated in 2 multinational, open-label, pivotal studies in previously treated patients (PTPs); a phase 3 study in adults and adolescents, referred to as Study I and a phase 3 paediatric study, referred to as Study II (see Paediatric population). The safety and efficacy of ALPROLIX was also evaluated in previously untreated patients (PUPs) with severe haemophilia B (Study IV), see Paediatric population.
Study I compared the efficacy of each of 2 prophylactic treatment regimens (fixed weekly interval with dosing of 50 IU/kg, and individualised interval with 100 IU/kg starting every 10 days) to on demand treatment. The study enrolled a total of 123 previously treated male patients (12 to 71 years of age) with severe haemophilia B (≤2% endogenous FIX activity). All patients received treatment with ALPROLIX and were followed for up to 77 weeks.
Out of 123 subjects who completed Study I, 93 were enrolled in Study III (extension study) with median total follow-up time of 6.5 years.
Of note, Annualised Bleeding Rates (ABR) are not comparable between different factor concentrates and between different clinical studies.
Prophylaxis fixed weekly and individualised intervals
Median weekly dose for subjects in the fixed weekly arm was 45.17 IU/kg (interquartile range (IQR) 38.1 -53.7) in Study I. The corresponding median ABR in subjects evaluable for efficacy were 2.95 (IQR: 1.01-4.35) and remained similar throughout Study III (1.85 (IQR: 0.76-4.0)). Subjects had a median of 0.38 (IQR: 0.00-1.43) spontaneous joint bleeds in Study III.
For subjects in the individualised interval arm, the median dosing interval was 12.53 days (IQR: 10.4-13.4) in Study I. The corresponding median ABR was 1.38 (IQR: 0.00-3.43) and remained similar throughout Study III (1.85 (IQR: 0.76-4.0)).
Dosing intervals and factor consumption remained similar in Study III (extension study) compared to Study I for both prophylactic regimens.
No bleeding episodes were experienced in 42% of subjects while on individualised prophylaxis and in 23% of subjects while on weekly prophylaxis. There was a lower proportion of subjects in individualised interval prophylaxis with ≥1 target joint at baseline than in weekly prophylaxis (27.6% and 57.1%, respectively).
Treatment of bleeding
Of the 636 bleeding events observed during Study I, 90.4% were controlled with 1 injection and overall 97.3% with 2 or fewer injections. The median average dose per injection to treat a bleeding episode was 46.07 (IQR: 32.86-57.03) IU/kg. The median overall dose to treat a bleeding episode was 51.47 IU/kg (IQR: 35.21-61.73) in the weekly prophylaxis arm, 49.62 IU/kg (IQR: 35.71-94.82) in the individualised interval prophylaxis arm and 46.58 IU/kg (IQR: 33. 33-59.41) in the on-demand treatment arm.
Perioperative management (surgical prophylaxis)
A total of 35 major surgical procedures were performed and assessed in 22 subjects (21 adults and adolescents, and 1 paediatric patient <12 years of age) in Study I and Study III. Of the 35 major surgeries, 28 surgeries (80.0%) required a single pre-operative dose to maintain haemostasis during surgery. The median average dose per injection to maintain haemostasis during surgery was 94.7 IU/kg (range: 49 to 152 IU/kg). The total dose on the day of surgery ranged from 49 to 341 IU/kg and the total dose in the 14-day perioperative period ranged from 60 to 1947 IU/kg.
The haemostatic response was rated as excellent or good in 100% of major surgeries.
Paediatric population
Study II enrolled a total of 30 previously treated male paediatric patients with severe haemophilia B (≤2% endogenous FIX activity). Patients were less than 12 years of age (15 were <6 years of age and 15 were 6 to <12 years of age). All patients received treatment with ALPROLIX and were followed for up to 52 weeks.
All of the 30 patients were treated with ALPROLIX on a prophylactic dosing regimen starting with 50-60 IU/kg every 7 days, with adjustment of dose to a maximum of 100 IU/kg and dosing interval to a minimum of once weekly and a maximum of twice weekly. Out of 30 patients having completed Study II, 27 enrolled to Study III (extension study). The median time on Study II+III was 2.88 years and median number of exposure days was 166.
Study IV enrolled 33 previously untreated paediatric patients (PUPs) with severe haemophilia B (≤2% endogenous FIX activity). The median age at enrolment was 0.6 years (range 0.08 to 2 years); 78.8% of subjects were less than 1 year old. The overall median number of weeks on ALPROLIX was 83.01 (range 6.7 to 226.7 weeks), and the overall median number of EDs was 76 days (range 1 to 137 days).
Prophylaxis individualised regimen
In Study II the median average weekly dose of ALPROLIX was 59.40 IU/kg (interquartile range, 52.95 to 64.78 IU/kg) for subjects <6 years of age and 57.78 IU/kg (interquartile range, 51.67 to 65.01 IU/kg) for subjects 6 to <12 years of age. The median dosing interval overall was 6.99 days (interquartile range, 6.94 to 7.03) with no difference in the median dosing interval between age cohorts. With the exception of one patient whose last prescribed dose was 100 IU/kg every 5 days, the other 29 patients last prescribed doses were up to 70 IU/kg every 7 days. No bleeding episodes were experienced in 33% of paediatric subjects. Dosing intervals and factor consumption remained similar in Study III compared to Study II.
Median annualised bleeding rates in subjects <12 years of age evaluable for efficacy were 1.97 (interquartile range 0.00 to 3.13) in Study II and remained similar throughout Study III (extension study).
In PUPs (Study IV) the median average weekly dose of ALPROLIX was 57.96 IU/kg (interquartile range 52.45 to 65.06 IU/kg) and the median average dosing interval was 7 days (interquartile range 6.95 to 7.12 days). Dosing intervals and factor consumption remained similar in Study IV compared to Study II and III. For PUPs receiving prophylactic treatment, 8 (28.6 %) of the subjects experienced no bleeding episodes. The overall median ABR for subjects in the prophylactic treatment regimen was 1.24 (interquartile range 0.0 to 2.49).
Treatment of bleeding episodes
Of the 60 bleeding events observed during Study II, 75% were controlled with 1 injection, and overall 91.7% of bleeding episodes were controlled with 2 or fewer injections. The median average dose per injection to treat a bleeding episode was 63.51 (interquartile range, 48.92 to 99.44) IU/kg. The median overall dose to treat a bleeding episode was 68.22 IU/kg (interquartile range, 50.89 to 126.19).
Of the 58 bleeding events observed in PUPs receiving prophylactic treatment in Study IV, 87.9% were controlled with 1 injection, and overall 96.6% of bleeding episodes were controlled with 2 or fewer injections. The median average dose per injection to treat a bleeding episode was 71.92 IU/kg (interquartile range 52.45 to 100.81 IU/kg). The median overall dose to treat a bleeding episode was 78.74 IU/kg (interquartile range 53.57 to 104.90 IU/kg).
⚠️ Warnings
The powder for injection in each vial must be reconstituted with the supplied solvent (sodium chloride solution) from the pre-filled syringe using the sterile vial adapter for reconstitution.
The vial should be gently swirled until all of the powder is dissolved.
The reconstituted solution should be clear to slightly opalescent and colourless. Reconstituted medicinal product should be inspected visually for particulate matter and discoloration prior to administration. Do not use solutions that are cloudy or have deposits.
This product is for single use only.
Any unused medicinal product or waste material should be disposed of in accordance with local requirements.
Instructions for preparation and administration
The procedure below describes the preparation and administration of ALPROLIX.
ALPROLIX is administered by intravenous (IV) injection after dissolving the powder for injection with the solvent supplied in the pre-filled syringe. ALPROLIX pack contains:
ALPROLIX should not be mixed with other solutions for injection or infusion.
Wash your hands before opening the pack.
Preparation:
1. Check the name and strength of the package, to make sure it contains the correct medicine. Check the expiry date on the ALPROLIX carton. Do not use if the product has expired.
2. If ALPROLIX has been stored in a refrigerator, allow the vial of ALPROLIX (A) and the syringe with solvent (B) to reach room temperature before use. Do not use external heat.
3. Place the vial on a clean flat surface. Remove the plastic flip-top cap from the vial.
4. Wipe the top of the vial with one of the alcohol swabs (F) provided in the pack and allow to air dry. Do not touch the top of the vial or allow it to touch anything else once wiped.
5. Peel back the protective paper lid from the clear plastic vial adapter (D). Do not remove the adapter from its protective cap. Do not touch the inside of the vial adapter package.
6. Place the vial on a flat surface. Hold the vial adapter in its protective cap and place it squarely over the top of the vial. Press down firmly until the adapter snaps into place on top of the vial, with the adapter spike penetrating the vial stopper.
7. Attach the plunger rod (C) to the solvent syringe by inserting the tip of the plunger rod into the opening in the syringe plunger. Turn the plunger rod firmly clockwise until it is securely seated in the syringe plunger.
8. Break off the white, tamper-resistant, plastic cap from the solvent syringe by bending the perforation cap until it snaps off. Set the cap aside by placing it with the top down on a flat surface. Do not touch the inside of the cap or the syringe tip.
9. Lift the protective cap away from the adapter and discard.
10. Connect the solvent syringe to the vial adapter by inserting the tip of the syringe into the adapter opening. Firmly push and turn the syringe clockwise until it is securely connected.
11. Slowly depress the plunger rod to inject all the solvent into the ALPROLIX vial.
12. With the syringe still connected to the adapter and the plunger rod pressed down, gently swirl the vial until the powder is dissolved.
Do not shake.
13. The final solution must be inspected visually before administration. The solution should appear clear to slightly opalescent (pearl-like) and colourless. Do not use the solution if cloudy or contains visible particles.
14. Ensuring that the syringe plunger rod is still fully pressed down, invert the vial. Slowly pull on the plunger rod to draw back all the solution through the vial adapter into the syringe.
Note: If you use more than one vial of ALPROLIX per injection, each vial should be prepared separately as per the previous instructions (steps 1 to 13) and the solvent syringe should be removed, leaving the vial adapter in place. A single large luer lock syringe may be used to draw back the prepared contents of each of the individual vials.
15. Detach the syringe from the vial adapter by gently pulling and turning the vial counterclockwise.
16. Discard the vial and the adapter.
Note: If the solution is not to be used immediately, the syringe cap should be carefully put back on the syringe tip. Do not touch the syringe tip or the inside of the cap.
After preparation, ALPROLIX can be stored at room temperature for up to 6 hours before administration. After this time, the prepared ALPROLIX should be discarded. Protect from direct sunlight.
Administration (Intravenous Injection):
ALPROLIX should be administered using the infusion set (E) provided in this pack.
1. Open the infusion set package and remove the cap at the end of the tubing. Attach the syringe with the prepared ALPROLIX solution to the end of the infusion set tubing by turning clockwise.
2. If needed apply a tourniquet and prepare the injection site by wiping the skin well with the other alcohol swab provided in the pack.
3. Remove any air in the infusion set tubing by slowly depressing on the plunger rod until liquid has reached the infusion set needle. Do not push the solution through the needle. Remove the clear plastic protective cover from the needle.
4. Insert the infusion set needle into a vein as instructed by your doctor or nurse and remove the tourniquet. If preferred, you may use one of the plasters (G) provided in the pack to hold the plastic wings of the needle in place at the injection site. The prepared product should be injected intravenously over several minutes. Your doctor may change your recommended injection rate to make it more comfortable for you.
5. After completing the injection and removing the needle, you should fold over the needle protector and snap it over the needle.
6. Please safely dispose of the used needle, any unused solution, the syringe and the empty vial in an appropriate medical waste container as these materials may hurt others if not disposed of properly. Do not reuse equipment.